Suspension clamps shall have the axis of oscillation in the plane of the axis of the con- ductor. They shall be used for both phase conductors and shield wires as well as for straight line and angle supports. Suspension clamps shall be capable of being fitted with counter weights.
Support clamps shall have the axis of oscillation in the plane of the axis of the conduc-tor. They shall be used for shield wires for straight line supports and shall be installed in the supports shield wire bracket.
Counterweight stirrups shall fit to the accompanying suspension clamp. They shall
transfer the load from the counterweight to the body of the suspension clamp. They
shall permit 45° of counterweight swing from the vertical plane in both directions.
Counterweight stirrups are also to be used with triple bundle conductors. See Figure
Transmission Line Fitting Suspension Clamp and Tension Clamp for ADSS Cable
Optical fiber cable fitting is a kind of line products used for installing support and protection of OPGW & ADSS cable. The line products include tension fittings, Suspension clamps, down lead fittings, spiral vibration damper, connection fittings, joint box, cable storage assembly, etc, tension fittings and suspension fittings are made up structural reinforcing rods. This kind of fittings bears the excellence of simple structure, easy to installation and also enables to stress equalizing and scattering, thus realize to grip and protect optical fiber cable.
|Material – Clamp||Aluminum|
|Material – Hardware||Galvanized Steel|
|Material – Pin||Stainless Steel|
|Material – Pin (Cotter)||Stainless Steel|
|Material – Socket and Clevis||Galvanized Ductile Iron|
|Product Category||Suspension Clamp|
|Strength Rating – Ultimate Body||30000 lb|